Error Code C1112 is a Rank C finisher fault generated exclusively when the FS-534SD configuration is installed — that is, the FS-534 staple finisher fitted with the optional Saddle… Read More →

Error Code C1103 is a Rank C finisher fault generated when the FS control board (FSCB) detects that the front alignment plate motor has failed to drive the front… Read More →

Error Code C0216 is a Rank B Large Capacity Tray (LCT) fault generated when the bizhub detects that the LCT paper stack has failed to reach the upper feed… Read More →

Error Code C0206 is a Rank B paper feed fault generated when the bizhub detects that the Tray 3 paper stack has failed to reach the upper feed position… Read More →

Error Code C0109 is a Rank B paper feed cabinet fault generated when the bizhub detects that the Tray 4 vertical transport motor (M122) is not responding correctly to… Read More →

Error Code C0108 is a Rank B paper feed unit fault generated when the bizhub detects that the Tray 4 paper feed motor (M121) is not responding correctly to… Read More →

Error Code C2414 is a Developing Unit/K New Article Release Failure on Konica Minolta bizhub machines. It occurs when a new black (K) developing unit has been installed,… Read More →

Error Code C2413 is a Developing Unit/Y (Yellow) New Article Release failure on Konica Minolta bizhub color machines. It fires when a new Yellow developing unit has been… Read More →

Error Code C0204 is a Tray 2 Feeder Up/Down Abnormality on Konica Minolta bizhub machines. It occurs when the machine commands Tray 2's lift-up motor to raise the… Read More →

Error Code C0107 indicates that the Tray 3 vertical transport motor (M112 or M132) is rotating at an abnormal timing. This error occurs in Konica Minolta bizhub machines… Read More →